Proper Use; Operation - Sanitas SHD 80 Gebrauchsanleitung

• Children should be supervised to ensure that they do not use the device as a toy.
• This electric blanket must be checked often for signs of wear or damage. If signs of this kind are
discovered, or if this electric blanket has been used improperly, it must be brought to the manufac-
turer or the dealer prior to being used again.
• If the mains connection cable of this electric overblanket is damaged, it must be replaced by the
manufacturer, its customer service department or a similarly qualified person to avoid any risk.
• Repairs may only be carried out by specially trained personnel at a repair workshop authorized by
the manufacturer, as special tools are required. Incorrect repairs can result in considerable danger
to the user.
• Should you still have questions on using our appliance, please contact our customer s ervice.

2. Proper Use

This electric blanket is intended for warming the human body. It may only be used as a cover, and not
underneath other bedding. This electric blanket is not intended for use in hospitals or for commercial
applications. In particular, it may not be used for infants, small children, persons insensitive to heat,
helpless persons or animals.

3. Operation

3.1. Safety
This electric blanket is equipped with a SAFETY SYSTEM. The electronic sensor technology prevents
overheating of the electric blanket over its entire surface with an automatic reduction of the tempera-
ture or with automatic switch-off if a fault occurs. If the electric blanket is automatically switched off
by the safety system due to a fault, then the signal lamp no longer lights up, even when the electric
blanket is switched on. Please note that the electric blanket can no longer be operated if a fault oc-
curs for safety reasons, and must be sent in to the specified service address.
3.2 Selecting temperature
To operate the the device, first connect the switch to the electric blanket by plugging in the connec-
tor. Plug the power cord into the mains outlet.
The electric blanket heats up most quickly when you initially set the highest temperature level. We re-
commend than selecting the lowest temperature level when using the blanket for several hours.
3.3 Temperature settings
Level: 0 = Off
1 = Minimum heat
2–5 = Individual heat
6 = Maximum heat
3.4 Automatic switch-off function
The electric blanket is automatically switched off after approx. 180 minutes.
The illuminated function display then starts to flash. To switch on the electric blanket again, first se-
lect the position „0", and then after approximately 5 seconds the desired temperature level.
If the electric blanket is no longer used after the automatic timeout, it should be switched off (setting
„0") or else unplugged from the mains.
7