AEG L 88489 FL Benutzerinformation Seite 9

The phase symbols
• When a programme is set, all the symbols of the phases related
to the programme come on.
• When the programme starts, only the symbol of the phase in op-
eration flashes.
• When the programme is completed, the symbol of the last phase
is on.
D
E
F
G
H
I
When the door is open - Refer to 'Loading the laundry' paragraph
J
The steam symbol comes on when you set a Steam pro-
gramme.
The detergent overdosing symbol comes on at the end
of the cycle when the appliance detects too much deter-
gent.
You cannot open the appliance door when the symbol is
on.
You can open the door only when the symbol goes off.
If the programme is completed but the symbol stays
on:
• The 'Rinse Hold' function is on.
• There is water in the drum.
The delay start symbol comes on when you set the delay
start function.
The child safety lock symbol comes on when this device
is activated.
• The programme time
When the programme starts, the programme time de-
creases with steps of 1 minute.
•
• The delay start
When you press the delay start button, the display
shows the delay start time.
• Alarm codes
If the appliance has a malfunction, the display shows
alarm codes. Refer to 'Troubleshooting'.
• The display shows this message for some seconds
when:
– You cannot set a function with the washing pro-
gramme.
– You try to change the washing programme while it op-
erates.
• When the programme is completed.
ENGLISH 9