AEG L 88489 FL Benutzerinformation Seite 11

START/PAUSE BUTTON
Press button 4 to start or interrupt a
programme.
DELAY START BUTTON
Press button 5 to delay the start of a
programme from 30 minutes to 20
hours.
TIME SAVE BUTTON
Press button 6 to decrease the duration
of the programme.
– Press one time to set 'Shortened du-
ration' for items with daily soil.
– Press two times to set 'Extra Quick'
for items with light soil.
Some programmes accept only
one of the two functions.
EXTRA RINSE BUTTON
Press button to add rinsing phases
7
to a programme.
Use this function for persons allergic to
detergents and in areas where the wa-
ter is soft.
THE STAIN-PREWASH
BUTTON
8
Press button to add the stain and/or
8
a prewash phase to a programme.
Press the button again and again to ac-
tivate one or two options. The related
symbol and the indicator bar comes on
in the display.
STAIN
• Use this function for laundry with
hard stains to remove.
When you set this function, put the
stain remover into compartment
This function increases the pro-
gramme duration.
This function is not available
with a temperature lower than
40° C.
PREWASH
4
• Use this function to add a prewash
phase before the washing phase. We
recommend that you use this func-
tion when you have laundry with a
high level of soil.
5
SPIN BUTTON
6
Press this button to:
• Decrease the maximum speed of the
spin phase of the programme.
• Deactivate the spin phase.
• Activate the 'Rinse Hold' function.
Set this function to prevent fabric
creases. The appliance does not
drain the water when the programme
7
is completed.
TEMPERATURE BUTTON
Press button
temperature. When the display shows
water.
ACOUSTIC SIGNALS
FUNCTION
You can hear the acoustic signals when:
• You activate the appliance.
• You deactivate the appliance.
• You press the buttons.
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic
signals, press button
at the same time for 6 seconds.
.
The set of this function increa-
ses the programme duration.
9
The display shows only the spin
speeds available with the set
programme.
to change the default
10
- -, the appliance does not heat the
If you deactivate the acoustic
signals, they continue operate
only when you press the buttons
and when a malfunction occurs.
ENGLISH 11
10
and button
8 7