Technical Data - Carl Valentin DPM III XI Schnellreferenzhandbuch

Technical Data

Print width
Print length
Resolution
Print speed
Back speed
Printhead
Built-in Fonts
Bar Codes
1D bar codes
2D bar codes
Composite bar codes
Interfaces
Transfer Ribbon
Core diameter
Length
Width
Colour
Print memory
Memory card
Dimensions in mm (width x height x depth)
Print mechanics
Control unit
Weight
Print mechanics
Electronics (incl. cable)
Control unit
Connection Values
Pneumatic connection
Air consumption typical*
* hub 1,5 mm
150 cycle/minute
6 bar operating pressure
Voltage supply
Nominal value
Protection values
Operating Conditions
Ingress protection rating
Temperature
Relative humidity
Technical modifications are subject to change
* depending on installation position
DPM III xi53
53,3 mm
60 mm, 140 mm, 240 mm, 340 mm, 447 mm, 570 mm, 630 mm
300 dpi
50 ... 450 mm/s*
50 ... 500 mm/s*
Corner Type
vector fonts: 8
bitmap fonts: 6
proportional fonts: 6
font height: min. 1 mm - max. 99 mm
CODABAR, Code 128, Code 2/5 interleaved, Code 39, Code 39 extended, Code 93,
EAN 13, EAN 8, EAN ADD ON, GS1-128, Identcode, ITF 14, Leitcode, Pharmacode,
PZN Code, UPC-A, UPC-E
Aztec Code, CODABLOCK F, DataMatrix, GS1 DataMatrix, MAXICODE, PDF 417,
QR Code
GS1 DataBar Expanded, GS1 DataBar Limited, GS1 DataBar Omnidirectional, GS1
DataBar Stacked, GS1 DataBar Stacked Omnidirectional, GS1 DataBar Truncated
serial: RS232C (up to 19200 bauds)
parallel: Centronics
USB: 1.1
Ethernet: 10/100 Base-T (option)
25,4 mm / 1"
max. 450 m (Ø 85 mm)
max. 55 mm
outside/inside
max. 16 MB
Compact Flash Card: 1 GB, 2 GB
(print length + 230) x
170 x 260
285 x 130 x 350 - connecting cable set to mechanics 2.5 m.
(depending on print length/print width)
e.g. xi53 x 60 mm = 7,3 kg / xi128 x 630 mm = 23 kg
10,5 kg
Desk case with control incl. foil keyboard with lighted display with 2 x 16 characters,
Compact Flash interface, PS/2 keyboard connection with external input and output.
Connecting cable set to mechanics 2.5 m.
6 bar dry and oil free
DPM IIIxi 53: 150 ml/min – DPM IIIxi 107+128: 300 ml/min
standard: 230 V AC / 50 ... 60 Hz
option: 115 V AC / 50 ... 60 Hz
230 V AC / 1,5 A – 115 V AC / 3 A
230 V AC / 3,15 AT – 115 V AC / 6,3 A
DPM III xi IP: IP 20
DPM III xi IP: IP 65
5 ... 40 °C
max. 80 % (non-condensing)
English
DPM III xi107
106,6 mm
50 ... 450 mm/s*
50 ... 500 mm/s*
25,4 mm / 1"
max. 450 m (Ø 85 mm)
max. 110 mm
outside/inside
(print length + 230) x
170 x 315
DPM III xi
DPM III xi128
128 mm
50 ... 400 mm/s*
50 ... 400 mm/s*
25,4 mm / 1"
max. 450 m (Ø 85 mm)
max. 130 mm
outside/inside
(print length + 230) x
170 x 335
97