Daily Use - Zanussi ZOB38903XD Benutzerinformation

Refer to "Care and cleaning"
chapter.
Clean the appliance and the accessories before
first use.
Put the accessories and the removable shelf
supports back to their initial position.
Setting the time
You must set the time before you
operate the oven.
When you connect the oven to the electrical
supply or after a power cut, the symbol
flashes.
Press the or button to set the correct
time.
After approximately five seconds the flashing
stops and the display shows the time of day.
Changing the time
1. Press again and again until the symbol
flashes.

Daily use

WARNING!
Refer to Safety chapters.
Display
A
Buttons
Button
On / off
Selection
6
B C
Function
2. Press the
time.
After approximately 5 seconds, the flashing
stops and the display shows the time of day you
set.
Preheating
Preheat the empty appliance to burn off the
remaining grease.
1. Set the function
temperature.
2. Let the appliance operate for 1 hour.
3. Set the function
temperature.
4. Let the appliance operate for 15 minutes.
Accessories can become hotter than usual. The
appliance can emit an odour and smoke. This is
normal. Make sure that the airflow in the room is
sufficient.
A. Oven function
B. Temperature
C. Time
Description
To activate or deactivate the oven.
To set an oven function.
or button to set the correct
and the maximum
and set the maximum
www.zanussi.com