Package Content - i-tec SLPA90W Gebrauchsanweisung

Quick Start / Ultra Slim Power Adapter
the right connector for your notebook, make sure the voltage is correct before using.
Connect the correct connector type to the universal cable output of the power adapter pic.
B,C). The adapter is now ready for use.
Step 3: Device connecting
Connect the correct connector type to the notebook (device) (pic. D).
To power equipment with USB power packs, the A USB port on the adapter can also be used
– see note 2 upper. This adapter is not primarily determined for supply of USB devices.
Some of USB devices need not be supplied or they are supplied slowly then with original
power supply.

PACKAGE CONTENT

• 1x Universal adapter 90W with output cable (110 cm)
• 1x AC power cord (150 cm)
• 1x Manual
• 11x Connectors for notebooks or other equipments (M1, M4–M8, M11,M12, M25, M28, M31)
LIST OF AVAILABLE CONNECTORS (TIPS)
Bellow you can see actual list of tips supplied in slim adapter's package. It is very hard to
cover new and new notebooks on market. Therefore you can visit our web site or contact
our tecnical support for info about all available tips.
No. Tip Spec.
M1 6.3*3.0*12.5 mm
M4 4.8*1.7*12.5 mm
Tips for laptops in the packaging - model P/N: SLPA90W
Output voltage
Replacement Models
(Range)
15 V TOSHIBA: 15V/3A, 15V/4A, etc.
(14.3–15.8 V)
E.g. Toshiba Portege R500
HP/COMPAQ: 18.5V/2.7A, 18.5/3.5A, 18.5V/3.8A, 18.5V/4.9A
18.5 V DELTA: 19V/2.64A; ASUS: 19V/2.64A
(17.6–19.4 V) NEC: 19V/2.64A; HP EliteBook Folio, ENVY Spectre XT series
Utrabook: 18.5V/3.5V, etc. E.g. HP/COMPAQ nx7000
EN
5