System Features - Audio-Technica ATW-T1802 Installation Und Betrieb

OM1800Ser_dual(europ).qxd:Layout 1
4
E
N
1/10/07 14:35 Page 4

System Features

• Two completely independent receiver channels in a single unit, for simultaneous
operation of two microphones
• Extremely compact receiver easy to mount on a camera with included Velcro-type
fastener
• UHF reception with up to 996 frequencies selectable in 25kHz steps
• Automatic frequency scanning for easy selection of open channels
• Tone Lock™ squelch system eliminates interference when transmitter is off
• Two independent balanced outputs (you can assign function of each,
independently)
• Headphone monitor output with independent level control
• Battery fuel-level indicator.
• Soft-touch controls for easy frequency selection
• True Diversity operation for freedom from dropouts
• LCD frequency and battery status display with backlight
• Antenna and AF Peak LED indicators
• Easy, user-friendly operation
• Clear, natural sound quality
• System components of the 1800 Series and 3000 Series Wireless Systems can be
used interchangeably*
*Note: The 1800 Series offers UHF Wireless operation frequencies in 25KHz step, therefore
the 1800 transmitters and receivers feature up to 996 selectable frequencies (depending on
the frequency band).
The components of the 1800 Series and 3000 Series are compatible, however considering
that transmitters and receivers of the 3000 Series operate only on 200 programmed
frequencies, a system composed of mixed element from 1800 Series and 3000 Series will
only operate on the 200 pre-programmed frequencies of the 3000 element.
Be certain to set each transmitter receiver pair to identical frequencies.
(dual-channel)