Xoro HRS 8580 Bedienungsanleitung Seite 61

Channel Search
2. Direct connection of satellite dish and receiver by using Tone burst
Tone burst is an additional feature of receivers. This signal
does not include digital commands, but it can nevertheless
be evaluated by most of the switches for position switching.
1. Choose a satellite. Switch to the right side
of the menu (RIGHT) and define "Burst A".
2. Change back to the left menu (EXIT), choose a
second satellite and apply the settings with OK
3. Change back to the right menu and define "Burst B"
Press BLUE to start searching.
A new menu appears asking for more parameters. After
setting all parameters press OK for starting the search. The
received programs are shown in the according lists and are
saved when the search is finished.
3. Using multiple satellites via DiSEqC 1.0
The distribution of analogue and digital signals from the Astra and Eutelsat is using DiSEqC™ (Digital Satellite
Equipment Control) is possible if only one cable to be laid to the satellite receiver. This new tax system complements the
conventional switching criteria, 14/18 Volt or 22 kHz, and removes the restrictions on maximum 4 switching states. The
simplest version of DiSEqC™ is used between two universal LNB switch to. The 22 kHz switching circuit is used for the
lower and upper frequency band LNB. DiSEqC 1.0 controls up to four LNB with the command position A / B and Option
A / B. DiSEqC 1.1 controls up to 64 LNB, it will switch in several levels of government. For 16 LNB, take for example four
4 / 1 DiSEqC 1.0 switch, whose outputs are then placed on the inputs of a 4 / 1 DiSEqC 1.1 switch.
1. Choose a satellite and define in the menu on the
right "LNB1" for DiSEqC1.0.
2. Press EXIT to change to the left side.
3. Now choose a second satellite on the left
menu and define the DiSEqC1.0
parameter to "LNB2".
4. And so on
You have the possibility to choose up to four satellites.
Press BLUE to start searching. A new menu
appears asking for more parameters. After setting all parameters press OK for starting the search.
The received programs are shown in the according lists and are saved when the search is finished.
First steps
20