Sandri Garden TL 60 Bedienungsanleitungen Seite 23

REPLACING THE CUTTERS (Fig.9)
Loosen the spring and take out the lock pin
(1). Remove the cutter from the shaft (2).
Fit the new cutter, making sure the shaft fas-
tening holes coincide and lock the entire
assembly with pin and spring.
CUTTER CONTROL CABLE ADJUST-
MENT (Fig.1 part.B)
The adjustment and control op-
eration must be done by an au-
thorised after-sales centre.
Bad adjustment could prove
hazardous!
Mass
Cutting width
Maximun cutter rotation speed
Vibrations on handle EN 1033: 1995
UNI EN 709: 1998
Sound power level
EN 1553: 2001
UNI EN 709: 1998
Power:
BRIGGS & STRATTON - XC 35
BRIGGS & STRATTON - XLS 50
HONDA
SANDRIGARDEN
SANDRIGARDEN
MOTOR HOE OPERATING MANUAL
MOTOR HOE TECHNICAL DATA
(without fuel )
- GVC 135
3,5 HP
5,5 HP
CLEANING TRANSPORT AND STORAGE
# In the event of the machine not being used for
over 2 months, empty the fuel tank.
# Do not clean with aggressive liquids.
# Keep the machine in a dry and safe place that
is not accessible to children.
# Before transporting, empty the fuel tank.
9. DISPOSAL
When the cultivator reaches the end of its working
life, take it to an authorised service centre to ask
information on decommissioning, dismantling
and disposal.
TL 40/N TL 60
36 Kg 39 Kg
38 cm 56 cm
90 / 125 1/min
2
5,9 m/s @ 3.000 rpm
LAcq 80,2 dB (A) - Lmax 98,7 dB (C)
@ 3.000 rpm
1,8 kW @ 3.000 rpm
3,47 kW @ 3.600 rpm
3,35 kW @ 3.600 rpm
1,90 kW @ 3.000 rpm
3,50 kW @ 3.600 rpm
GB
23