JABSCO 32605 Installationsanleitung Seite 2

Washdown Pump
WASHDOWN PUMP
50 PSI (3.5 BAR) / 3.0 GPM (11.4 LPM)
60 PSI (4.3 BAR) / 4.0 GPM (15 LPM)
FEATURES
High Pressure / High capacity
l
Suitable for Use with Salt Water
l
Corrosion Resistant
l
Dry Running Capability
l
Long Life Sealed Motor
l
SPECIFICATIONS
Pump – Polypropylene
l
Pump Design – 3 Chamber Diaphragm
l
Suction Lift – Self Priming to 8 ft. (2.5 m)
l
Ports 3/4" (19 mm) Hose Barb Fittings
l
Motor – Permanent Magnet
l
ISO 8846 MARINE (Ignition Protection)
l
WARNING – FIRE AND EXPLOSION HAZARD
DANGER – REDUCE THE RISK OF ELECTRIC SHOCK
NOTE: Always follow all electrical and safety codes,
in accordance with the most recent National
Electrical Code (NEC), ABYC E-11, AC and DC
Electrical Systems on Boats.
CAUTION – BURN HAZARD
Installation site must be well
vented and free of all flammable
materials and fluids (fuel, oil,
kerosene, etc) from area. Failure to
comply may result in fire, damage
to the pump and /or personal
injury or death.
Disconnect power from the system
before working on the unit to
avoid personal injury, damage to
the surrounding environment and/
or damage to the unit.
Motor case could get hot during
extended operation. Prolonged
contact with skin may cause a
burn.