Maintenance, Overhaul, Repair; Maintenance; Overhaul; Repair - RECHNER SENSORS N-132 Bedienungsanleitung

Maintenance, Overhaul, Repair

EN
11 Maintenance, Overhaul, Repair
EN
EN

11.1 Maintenance

• Consult the relevant national regulations to determine the type and extent of
EN
inspections.
EN
• Adapt inspection intervals to the operating conditions.
EN
EN During maintenance of the device, check at least:
• whether the clamping screws holding the electric lines are securely seated,
EN
• whether the device enclosure and / or protective enclosure have cracks or other visible
EN
signs of damage,
EN
• whether the permissible ambient temperatures are observed,
• whether the device is used according to its designated use.
EN
EN

11.2 Overhaul

EN
The device does not require regular maintenance.
EN
EN
EN
EN
EN
EN

11.3 Repair

EN
EN
EN
EN
EN
EN

11.4 Returning the Device

• Only return or package the devices after consulting
RECHNER Industrie-Elektronik GmbH! Contact theresponsible
representative from RECHNER Industrie-Elektronik GmbH.
RECHNER Industrie-Elektronik GmbH's customer service is available to handle returns
if repair or service is required.
• Contact customer service personally.
22
Isolating Switching Amplifier
N-132
Observe the relevant national regulations in the country of use.
Explosion hazard due to improper repair!
Non-compliance results in severe or fatal injuries.
• Repair work on the devices must be performed only by
RECHNER Industrie-Elektronik GmbH.
DANGER
201202 / 9170613310
2018-11-20·BA00·III·en·09