Saving A Memory-Position; Moving To A Saved Position; Keylock - Logic Data Ir-Fernbedienungs-System Bedienungsanleitung

Attention:
During motion of the accessory drive it must be ensured that no parts of the
body or other objects can get caught or squeezed.
Saving a Memory Position:
Depending on the type of the motor control you can save maximally four or
maximally six different positions and move to these positions later again.
How to save a position:
ð
PRESS THE "MEMORY" KEY
ð
PRESS ONE OF THE MEMO-KEYS
After having saved a position a double-click of the motor control
is heard.
Information:
If the memo-key is not pressed within 5 seconds after having pressed
"Memory" key, nothing will be saved.

Moving to a Saved Position:

ð
KEEP ONE OF MEMO-KEYS
THE POSITION IS REACHED.
When the saved position is reached the drives stop automatically.
If the key is released earlier, the drives also stop.
Attention:
During motion of the drives it must be ensured that no parts of the body or
other objects can get caught or squeezed.

Keylock:

When the keylock is activated the system cannot be started unintentionally.
How to activate the keylock:
ð
KEEP KEY
The transmitter LED blinks once.
Now the keys have no function.
PRESSED FOR
CA
- 16 -
PRESSED UNTIL
. 2.5 SECONDS
the