Operation With A Dcc Command Station (Multimaus®); Programming Modes; More Functions - roco BR 23 002 Bedienungsanleitung

▪ Operation with a DCC Command Station (MULTIMAUS®)
As the (MULTIMAUS®) has 20 function keys and a light button, can be especially comfortably operated.

Programming modes:

The locomotive and carriages react to all DCC programming modes.
We recommend: direct CV programming (byte by byte) or POM mode (programming on main track).
The programming is described in the MULTIMAUS® manual.
Reading CVs:
With the appropriate equipment (e.g. / Z21® / z21® / z21start® ), you can read the value byte by byte and bit by bit.

▪ More Functions

You can find out about a range of other possible set-tings, which are probably very rarely needed, relating to drive speed curve, load control
setting or noise synchronization from the detailed handbook.
This can be downloaded as a pdf document MX645P22 from www.zimo.at.
45
73018-920 ETBA neues Design flach DBBR 23 002.indd 45 29.04.2019 08:37:41