Bosch MPC Serie Installationsanleitung Seite 20

en | Notice
20
1 Notice
Notice!
Installation must only be carried out by authorized specialist personnel.
Warning!
!
Live components and stripped cable! Risk of injury from electric shock. The system must be
current-free during connection work.
Notice!
The CD includes the FSP-5000-RPS Programming Software and the required product
documentation of the panel.
Notice!
Use the MPC-XXXX-C Panel Controller only with the PRS-0002-C Short Rail.
Use solely the 5-wire cable of the Panel Controller for connection to the Panel Rail Short.
Notice!
Except for the BCM Battery Controller Module, all other modules do not work, if plugged onto
the PRS 0002 A short rail.
2 Functional Description
The Panel Controller controls every component connected to the panel and features the
following functional elements (see Figures, page 4):
Pos. Designation
A Touch screen
B 22 fixed buttons
C 11 LEDs
D Key switch
E 3 rotary switches
F Reboot button
G 6-pin DIP switch
H Ground wire
3 Installation
The FPA-1200-MPC-C Panel Controller is only used with the FPA-1200 Fire Panel.
The MPC-XXXX-C Panel Controller may be mounted into the following FPA-5000 housings:
CPH 0006 A, MPH 0010 A, HCP 0006 A and HBC 0010 A.
For the installation, follow these instructions (see also Figures, page 4):
2013.06 | 3.0 | F.01U.258.925
Function
Operating the panel through virtual buttons and variable display windows
Standard entries
Indicating the operating status
2 switch settings, freely programmable, e.g. for switching between day/night
mode, or connection/disconnection to and from the local alarm signaling
Address setting
Panel HW reset
Configuration
Grounding the panel
Installation Guide
Panel Controller
Bosch Sicherheitssysteme GmbH