Unpacking; Intended Use; Safety Information - ACD DS260 Kurzübersicht

9 Unpacking

Package contents:

Device

Battery

Docking station and connection kit

Brief overview
Check that all components are undamaged and that all package contents are present.

10 Intended use

The M260SE Set (M260SE/DS260) data acquisition system is a solution for the mobile acquisition and
transfer of data. For example, do not use the system in explosive areas, etc.
Observe all warning information regarding the use of wireless devices.
The supplied connection set (see Point 1) is only intended for use with the M260SE Set.

11 Safety information

Read the following information. It serves to ensure your safety as well as the operational readiness of the
device.
Only original ACD power supply units and ACD-approved batteries
may be used for the operation of the M260SE and the DS260. The
utilization
ATTENTION
destruction of the device. Remove the battery from the device if it
is not used for an extended period of time.
ATTENTION
M260SE_Set_Kurzübersicht_V1 12_de_en.docx
of non-approved
Never look directly into the beam of the laser. Always switch off
the device during cleaning.
The laser classification is stated upon one of the stickers on the device.
components can lead
Laser beam
exit
to the
9 / 16