How To Choose Modes - Hayward Pools ENERGYLINE ELE0601 Einbau- & Anleitungshandbuch

4. USAGE AND OPERATION
Parameter 6
System Quantity
(don't set)
Parameter 9
Pump: 0 (always open), 1 (60 second start
before compressors start; 30 second stop
after compressors stop)
4.3 How to choose Mode
4.4 How do you know what the current status are?
Water inlet temperature
Condenser temperature
Parameter 7
Save setting after
power off or not
1 (yes) 0 (No)
If the heat pump is configured in reverse
(Heating and cooling mode, select 1 in menu 8,
§ 4.2) you can manually change the operational
Defrost LED mode for your heat pump. Simply press the
mode button on the control to coincide with the
Heating mode
light for the required operational mode (red light
Cooling mode
= heating; green light = cooling).
Water outlet temperature
Ambient temperature
Parameter 8
Mode: 0 (cooling only)
1 (cooling & heating)
2 (auxiliary elec. heating)
3 (heating only)
Evaporator coil
temperature
9