Installation And Connection; Installation Illustration; Adjusting The Water Flow - Hayward Pools ENERGYLINE ELE0601 Einbau- & Anleitungshandbuch

3. INSTALLATION AND CONNECTION

3.1 Installation illustration

Installation items:
The factory only provides the heat pump unit; the other items in the illustration are
necessary spare parts for the water system, provided by users or the installer.

Adjusting the water flow:

The water-inlet and water-outlet valves are open; adjust the by-pass valve so that there
is a 2°C increase between the water-inlet and water-outlet temperature. You can check
the adjustment by looking at the water-inlet and water-outlet temperature on the LED
controller (see chapter 4.4).
NB: Opening the by-pass increases flow.
Closing the by-pass reduces flow
4
Water
inlet valve
By-pass
valve
Water
Chlorinator cell
outlet valve
Filter
Water
Pump
Water outlet
Valve
Water supply
Pool