Technical Data; Mobile Terminal - ACD M260TE Kurzübersicht

17 Technical Data

17.1

Mobile terminal

The M260TE mobile terminal technical data is contained in the table below.
Housing
Protection class
Operating
temperature
Storage temperature
Relative humidity
Dimensions
Weight
Power supply
Display/screen
Touchscreen
Keyboard/buttons
Barcode scanner
Processor
Memory
Operating system
Interfaces
Optional
On request
Accessories
M260TE_Set_Kurzübersicht_Brief Overview_V1.05_de_en
ABS
IP54
0 °C to +40 °C
Operation down to temperatures of -20 °C in cold storage chambers is
permissible. You should allow the device to run for 20 minutes prior to
this. Condensation on the device must be avoided.
-20 °C to +70 °C (without the battery)
5 % – 90 %, not condensing
approx. 219 x 62/83 x 39/41 mm (L x B x H)
approx. 480 g
7.4 V/Li-PO quick-change rechargeable battery, 2200 mAh
3.5" TFT colour screen with LED backlight,
240 x 320 pixels, 640 cd/m
1 status LEDs
Resistive touch, surface hardness at least 3H
Quick-entry keyboard with alphanumerics function, 15 mm space between
keys, 15 keys in hard case design, 10 function keys
or
Illuminated silicone keyboard with alphanumerics function, 22 keys, 10
function keys
1D-scanner integrated in the housing (scanner buttons located on the side
of the device)
NXP processor i.MX6 DualLite, 1 GHz
4 GB flash, 1 GB RAM
larger memory available as an option via µSD card
Windows Embedded Compact 7 (EC7)
µSD-Card (accessible from the battery compartment)
USB-Host (100 mA) or USB-Slave
integrated speaker for system messages
2D scanner
1D long range scanner
2D long range scanner
SDIO WLAN radio card according to IEEE 802.11a/b/g/n with BT-
compatible close-range network
Illuminated silicone keyboard
Ivanti/Wavelink Products
5 MP Auto-focus camera with lighting
UMTS
GPS
Retainer strap
Stylus
Docking station DS260
Battery charger NP260
Vehicle holder M260
Handle
Belt or shoulder bag
RAM Mounting device
Zipper and strap
2
31 / 33