Mobile Terminal Expansion Options; Scanner - ACD M260TE Kurzübersicht

16 Mobile terminal expansion options

16.1 1D scanner
A 1D scanner is available as an optional accessory for the mobile terminal. The scanner is located under the
disc at the top of the housing. The integrated hardware allows for various energy-saving modes.
ACD Elektronik GmbH have developed a scanner driver for controlling the scan module. The program as
well as detailed documentation and development files are available from ACD Elektronik GmbH.
The following table contains the typical reading distances of the 1D scanner:
Barcode size
5.0 mil Code 39
7.5 mil
10 mil
20 mil Code 39
40 mil
55 mil Code 39
70 mil, reflecting
100 mil, reflecting, code 39
* Not specified as the minimum distances are highly dependent on the width of the barcode and the scanning
angle.
16.2 2D scanner
A 2D scanner is available as an optional accessory for the mobile terminal. The scanner is located under the
disc at the top of the housing. The integrated hardware allows for various energy-saving modes.
ACD Elektronik GmbH have developed a scanner driver for controlling the scan module. The program as
well as detailed documentation and development files are available from ACD Elektronik GmbH.
The following table contains the typical reading distances of the 2D scanner:
Barcode size
5,0 mil Code 39
7.5 mil
10 mil
20 mil Code 39
40 mil
55 mil Code 39
70 mil, reflecting
100 mil, reflecting, code 39
* Not specified as the minimum distances are highly dependent on the width of the barcode and the scanning
angle.
M260TE_Set_Kurzübersicht_Brief Overview_V1.05_de_en
Min. distance
Approx. 5.6 cm
-
-
*
-
*
-
*
Min. distance
*
-
-
*
-
*
-
-
Max. distance
Approx. 32.0 cm
-
-
Approx. 132.0 cm
-
Approx. 230.0 cm
-
Approx. 500.0 cm
Max. distance
Approx.17.0 cm
-
-
Approx. 52.0 cm
-
Approx. 76.0 cm
-
-
28 / 33