Hama SIRIUM1000ABT Kurzanleitung Seite 9

• Select the required WLAN name (SSID) with which you
wish to connect the loudspeaker.
• Now also enter your network key if necessary and
con rm with [Save].
• Con rm the selected settings by pressing [CONFIRM].
• The loudspeaker now connects to the network. After
successful connection, "Loudspeaker con gured
successfully" appears on the smartphone.
• The LEDs go out after a few seconds.
Note
• If using iOS, the app may need to be closed and restarted.
Then follow the two steps below.
• The sound bar that has been set up should now appear
in the main menu. Press the loudspeaker icon.
• Touch [Sources] at the bottom edge of the screen to
establish a connection to your Amazon account.
• Then touch the [Amazon Alexa] button.
• Touch [SIGN IN WITH AMAZON] to open the web browser
to enter your access details.
Note
• If the Amazon Shopping app has already been installed
and set up on your smartphone, simply skip the
following steps.
• Using your smartphone's keypad, enter the access
details for your Amazon account and con rm your
entries with Login.
• Alternatively, tap [Create new Amazon account]
to create a new Amazon account.
• Following successful login, you will return to the Hama
Smart Audio app.
• Now choose the language to which Alexa is to respond
in future.
Note
• If you change the language, an update may be
required to carry out the language adjustment. This
can take up to 4 minutes.
• Open the Amazon Alexa app and if necessary re-enter
your access details. You should then nd the loudspeaker
in your active devices.
• Next, adjust your personalised settings (time zone, device
name, etc.) in the Amazon Alexa app. Further information
on this can be found at www.amazon.com -> Help and
Customer Service.
Note
• If the Amazon Market app has already been installed
and set up on your smartphone, some smartphones
will take the user data directly from the app.
• To set up a new Amazon account, log out and repeat
the steps described in this section.
Note – Alexa Push to Talk / function key
• Brie y press the [Action] button (4) on the loudspeaker
to activate Alexa during audio mode or with high
volume settings. Alternatively, press the [Action] button
(3) on the remote control.
• Press the [Microphone Mute] button (3) to switch the
microphone off. If the microphones are deactivated, the
status LEDs (1–5) light up solid red. Alternatively, press
the [Microphone Mute] button (4) on the remote control.
• The loudspeaker will now no longer respond to the
activation word until the microphones are reactivated.
• Press the [Microphone Mute] button (3) again to
reactivate the microphone. Alternatively, press the
[Microphone Mute] button (4) on the remote control.
The status LEDs (1–5) go out.
7. BIuetooth pairing
You can pair your devices with the loudspeaker using
Bluetooth and use this as a playback device for audio signals.
You can control playback directly on the terminal device. The
volume can also be controlled directly on the loudspeaker.
Note – Bluetooth
®
• Check whether your mobile device (smartphone, tablet
PC. etc.) is Bluetooth-capable.
• Note that the maximum range for Bluetooth
metres without obstacles such as walls, people, etc.
• The connection may be disrupted by other Bluetooth
devices/connections in the vicinity.
• The loudspeaker can only ever be paired with one
device at a time.
• Note that compatibility depends on the supported
Bluetooth pro les as well as the Bluetooth
®
being used. (See: Technical data in the operating
instructions for the respective device)
• Ensure your Bluetooth-enabled device is switched on
and that Bluetooth is activated.
• Press and hold [Bluetooth] (2) for approximately
2 seconds to activate pairing mode.
• The status LED starts to ash blue and a signal tone
is heard.
• Open the Bluetooth settings on your device and wait
until the Hama SIRIUM1000ABT is shown in the list
of found Bluetooth devices.
• If necessary, start searching for Bluetooth devices on
your device.
• Select the Hama SIRIUM1000ABT loudspeaker in the
list of available devices and wait until the loudspeaker is
shown as connected in your device's Bluetooth settings.
• The Bluetooth status LED now lights up solid blue.
• Start and control audio playback using the controls on
your device.
is 10
®
®
versions
®
5