Inhaltsverzeichnis
Werbung
OBJ_BUCH-1716-001.book Page 16 Tuesday, June 26, 2012 3:19 PM
16 | English
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider
Senior Vice President
Engineering
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
26.06.2012
Assembly
Changing the Cap-knob (see figures A1
– Turn the lock ring 3 anticlockwise to the stop and pull the cap-knob (1
or 2) up and off.
– Mount the desired cap-knob (1 or 2) in such a manner onto the spice
container 4 that the hexagon retainer of the cap-knob fits on the drive
bar 6 of the grinding mechanism, and the cogs of lock ring 3 engage in
the recesses of the spice container.
– Turn the lock ring 3 clockwise to the stop and check the tight seating of
the cap-knob.
Filling the Spice Container (see figure B)
– Turn the lock ring 3 anticlockwise to the stop and pull the cap-knob (1
or 2) up and off.
– Fill the desired spice into the spice container 4. Do not fill the spice
container to the top.
– Mount the desired cap-knob (1 or 2) again.
Operation
Setting the Grinding Degree (see figure C)
– More fine grinding:
Turn adjustment screw 8 clockwise.
– More coarse grinding:
Turn adjustment screw 8 anticlockwise.
1 619 929 L40 | (26.6.12)
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
A2)
–
Bosch Power Tools
Werbung
Inhaltsverzeichnis
