E-Mu 1212M PCI Bedienungsanleitung Seite 7

4 - E-MU 1010 PCI Card & Interface
The E-MU 1010 PCI card is the heart of the system and contains E-MU' s powerful E-DSP chip. The powerful hardware DSP
on this card leaves more power free on your CPU for additional software plug-ins and other tasks.
Connections
EDI
Conéctelo al
Audio Dock
a través de
cable EDI
Entrada/
salida
S/PDIF
Entrada/
salida ADAT
o S/PDIF
óptica
Connects to the MicroDock using EDI (E-MU Digital Interface) cable. This cable provides
EDI
a a two-way data link between the E-MU 1010 and the MicroDock.
Connector
Each RCA phono jack carries two channels of digital audio. S/PDIF digital I/O can be used
for the reception and/or transmission of digital data from external digital devices such as
S/PDIF
a DAT machine, an external analog-to-digital converter or an external signal processor
Digital
equipped with digital inputs and outputs.
Audio
Input &
The S/PDIF out can be configured in either Professional or Consumer mode, always with
Output
24-bits of resolution.
Important: S/PDIF I/O is disabled on the 1010 PCI when the MicroDock is connected.
The ADAT optical connectors transmit and receive 8 channels of 24-bit audio using the
ADAT type 1 & 2 formats (at 44.1kHz or 48kHz). The word clock contained in the input
®
ADAT
data stream can be used as a word clock source. The ADAT optical ports can also be
Optical
switched to carry optical S/PDIF .
Digital
ADAT can also be transmitted and received at 96kHz or 192kHz using the S/MUX
Input &
standard which encodes the extra data onto multiple channels.
Output
Important: ADAT I/O is disabled on the 1010 PCI when the MicroDock is connected.
Getting Started - 7