Herunterladen Inhalt Inhalt Diese Seite drucken

h.koenig MXC36 Bedienungsanleitung Seite 7

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 18
Ingredients
Cut the ingredients into small pieces before putting them into the mixing jug.
Operation
CAUTION : Always switch off the device before removing the mixing vessel from the base.
Do not overfill the mixing vessel! Observe the gradation on the vessel.
Never put hard ingredients into the mixing jug! Ingredients such as nuts or blocks of
chocolate damage the appliance.
Preparation
1.Prepare the ingredients
2.Set the mixing vessel onto the base device, if that has not yet been done.
3.Fill the jug with the ingredients.
4.Set the lid with the cap onto the vessel.
5.Plug the mains plug into a properly installed earthed socket.
6.Use the ON/OFF button to switch on the appliance.
Mixing cold dishes/ beverages
NOTE:
Do you want to add sugar or spices to your mixed drink?
First switch off the device.
Remove the cap and fill in through the opening.
Reinsert the cap into the lid.
WARNING:
Do not put your hand into the mixing jug!
The blades are sharp and rotate at high speed. Serious injuries could result.
Proceed ad described under "Preparation"
Preparing hot dishes
NOTE:
Observe the sequence: First cooking, then pureeing.
Always add the amount of liquid indicated in the recipes while cooking.
Proceed as described under "Preparation"
7.Select a heating function.
8.Decrease or increase the cooking time with the + and – buttons, if necessary..
9.If you want to terminate the preparation before the cooking time has elapsed, press the ON/OFF.
10.Put on the cap of the filler opening. Press
End operation
1.Turn off the appliance with ON/OF button.
2. Disconnect the main plug from the outlet.
IV) CLEANING
WARNING:
Before cleaning always disconnect from mains power supply
Under no circumstances should you immerse the device in water for cleaning purposes.
Otherwise this might result in an electric shock or fire.
The mixer blades are sharp! Risk of injury!
Clean the blade assembly by rinsing it under water. Do not touch the blades because they are very sharp.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis