h.koenig MXK32 Bedienungsanleitung Seite 7

•
The jug body should be handled carefully. The jug contains moving parts- do not leave
the jug immersed in water for longer than necessary to clean it or you may affect the
operating performance of the blender.
•
Handle blades with care especially during cleaning as they are extremely sharp.
•
DO NOT wash the jug or attachments in a dishwasher.
Although it is not advisable to take apart the jug base with the blades, in case you have
taken it apart, you should re-install the parts back in the correct order.
1. Fit the rubber Sealing Ring
first securely under the blades.
Caution! The blades are very sharp.
2. Assemble the fitted Sealing Ring
and blades into the jug base
3. Fit the plastic Locking Ring into
the jug base and rotate it tightly.
Cleaning the Base
1. Ensure the blender is switched off and unplugged from the mains.
2. Wipe the outer surface of the motor unit with a damp cloth. Never use abrasive cleaners
or scouring creams.
Never immerse the base in water when cleaning.
.
Sealing Ring
Locking Ring