Mitsubishi Electric PAR-31MAA Installationsanleitung Seite 9

8. Remote controller button functions
(4) RETURN button
(3) MENU button
(5) SELECT button
(1) ON/OFF button
Use to turn ON/OFF the indoor unit.
(2) Function buttons
Use to select the operation mode or to set the temperature and fan speed
on the Main display.
Use to select items on other screens.
(3) MENU button
Use to bring up the Main menu.
(4) RETURN button
Use to return to the previous screen.
(5) SELECT button
Use to jump to the setting screen or to save the settings.
(6) Operation indicator
Stays lit during normal operation. Blinks during startup and when an error
occurs.
(7) Backlit LCD
Dot display. When the backlight is off, pressing any button turns the backlight
t will stay lit for a certain period of time depending on the screen.
on and i
Performing any button operation keeps the backlight on.
Note: When the backlight is off, pressing any button turns the backlight on and
does not perform its function. (except for the ON/OFF button)
Button operations on the Main menu
Main
Cursor Vane·Louver·Vent. (Lossnay)
High power
Timer
Weekly timer
OU silent mode
Main display:
Cursor
F1
Main menu
Page
F2 F3 F4
(7) Backlit LCD
(2) Function buttons
F1, F2, F3, and F4 from the left
(6) Operation indicator
(1) ON/OFF button
Pressing the MENU button will bring up the Main menu as
shown below.
(Refer to section 9.(2) "Main display" for details.)
1/3 Vane
2/3 Restriction
3/3 Maintenance
*1 Refer to the Instructions Book in the CD-ROM for details.
*2 Explained in this manual.
*3 If no buttons are pressed for 10 minutes on the initial
setting screens, or 2 hours on the service screens (10
minutes on some screens), the screen will automatically
return to the Main display. Any settings that have not
been saved will be lost.
The available items on the menu depend on the connected
indoor unit model. For items not described in the manuals
that are enclosed with the MA remote controller, refer to the
manuals that came with the air conditioning units.
Page
Move the cursor to the desired function with the F1
and F2 buttons, and press the SELECT button to
go to the next page. Password may be required.
The function of the MENU, SELECT, and RETURN
buttons will appear on the setting screens.
Button function guide will appear at the bottom of
the screens.
– 9 –
· ·
Louver Vent. (Lossnay)
High power
Timer
Weekly timer
OU silent mode
Energy saving
Night setback
Filter information
Error information
Initial setting
Service
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*2 *3
*2 *3