Herunterladen Inhalt Inhalt Diese Seite drucken

Properties Of The Device - YATO YT-73086 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 13

PROPERTIES OF THE DEVICE

The all-purpose meter is a digital measurement instrument designed to measure distinct electrical quantities. In case of certain meas-
urement quantities the meter adapts an adequate range depending on the result of the measurement.
Before using the meter, read the whole manual and keep it.
The meter has a plastic housing, a liquid crystal display and a measurement range switch. The housing is equipped with measurement
sockets and a transistor check socket. The meter is equipped with measurement cables with plugs. The meter is supplied without a
battery.
ATTENTION! The meter is not a measurement device as it is construed within the „Measurement Law"
TECHNICA DATA
Display: LCD 3 3/4 digits – maximum displayed result: 3999
Sampling frequency: approximately 2-3 times per second
Overload signalling: digit „OL" is displayed
Polarization signalling: symbol „-" is displayed before the result of the measurement
Battery: 6F22; 9 V
Working temperature: 0 ÷ 40°C at the relative humidity <75%
Storage temperature: -10°C ÷ +50°C; at the relative humidity <85%
External dimensions: 165 x 83 x 47 mm (without the rubber protection)
Weight: approximately 355 g (without the rubber protection)
ATTENTION! It is prohibited to measure electrical quantities exceeding the maximum measurement range of the meter.
Direct voltage
Parameter
for the range 400 mV: R
other ranges: R
Catalogue number
Range
Resolution
400 mV
0,1 mV
4 V
40 V
10 mV
YT-73086
400 V
600 V
Overload protection: range 400 mV:
Remarks
250 V; other ranges: 600 V
Parameter
Resistancea
Catalogue
Range
Resolution
number
400 Ω
0,1 Ω
4 kΩ
1 Ω
40 kΩ
10 Ω
YT-73086
400 kΩ
0,1 kΩ
4 MΩ
1 kΩ
40 MΩ
10 kΩ
Open circuit voltage approximately 0,45
Remarks
V; Overload protection 250 V d.c./a.c.
Parameter
Catalogue number
Range
YT-73086
-20
C ÷ +1000
O
Overload protection 250 V d.c./a.c. Precision does not take into account the
error of the thermoelement. The indicated precision applies to the changes in
Remarks
the ambient temperature which do not exceed ± 1
ambient temperature amounting to ± 5
Precision: ± % of the indication + weight of the least significant digit
Alternating voltage
> 1000 MΩ;
R
= 10 MΩ; f
IN
= 10 MΩ
IN
IN
Precision
Range
Resolution
±(1,0% + 5)
4 V
1 mV
40 V
±(0,8% + 3)
400 V
0,1 V
600 V
1 V
±(1,0% + 5)
Overload protection: 600 V
Precision
Range
±(1,0% + 5)
4 nF
40 nF
400 nF
±(1,0% + 3)
4 μF
40 μF
±(2,0% + 5)
100 μF
Precision does not take into account the error
implied by the capacity of the meter and the
measurement cables. For ranges ≤ 200 nF the
result must be reduced by the capacity of the
meter and the measurement cables
Temperature
Resolution
-20
C
1
C
0
C ÷ 400
O
O
O
400
O
C ÷ 1000
C; in case of changes in the
O
O
C the indicated precision is achieved
after one hour.
O P E R A T I N G
PL GB
= 40 ÷ 400 Hz
IN
Precision
Range
0,1 mV
400 μA
1 mV
±(1,0% + 5)
4000 μA
10 mV
40 mA
400 mA
0,1 V
±(1,2% + 5)
4A
10 A
Overload protection: fuse 500 mA/250 V; range 10 A: no fuse - measurement
of the current > 5A , duration of measurement < 10 s. in intervals > 15 min.
Capacity
Resolution
Precision
Range
0,001 nF
±(4,0% + 10)
10 Hz
0,01 nF
100 Hz
0,1 nF
1 kHz
±(4,0% + 5)
0,001 μF
10 kHz
0,01 μF
100 kHz
0,1 μF
±(8,0% + 5)
Input voltage range: 1 V rms ÷ 20 V rms;
Overload protection 250 V d.c./a.c.
Precision
Range
O
C ÷ 0
O
C: ±(6,0% + 5)
C: ±(1,5% + 5)
5% ÷ 95%
O
O
C: ±(1,8% + 5)
M A N U A L
Direct current
Alternating current
U
≤ 400 mV
AB
Resolution
Precision
Range
0,1 μA
400 μA
1 μA
4000 μA
±(1,2% + 3)
0,01 mA
40 mA
0,1 mA
400 mA
0,001 A
±(1,8% + 3)
4A
0,01 A
±(2,0% + 5)
10 A
Frequency
Resolution
Precision
0,01 Hz
±(1,0% + 3)
0,1 Hz
0,001 kHz
0,01 kHz
±(0,8% + 3)
0,1 kHz
Pulse-duty factor
Resolution
0,1%
Input voltage range: 3 Vp-p ÷ 10 Vp-p;
Overload protection 250 V d.c./a.c.
f
= 40 ÷ 400Hz
IN
Resolution
Precision
0,1 μA
1 μA
±(1,5% + 5)
0,01 mA
0,1 mA
0,001 A
±(2,0% + 5)
0,01 A
±(3,0% + 10)
Diode tests
Conditions for measure-
ment
I
= 1 mA
U
= 1,5 V
F
R
Overload protection 250
V d.c./a.c.
Precision
1 Hz ÷ 10 kHz: ±(2% + 5);
>10 kHz; undetermined
9

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis