HP Designjet T1120 SD-MFP Anleitung Seite 6

13
For its protection, the scanner's touch-
screen is shipped folded down in its
"transportation" position, and needs to
be lifted up and locked in its "ready"
position. Grasp the top edge of the
screen with one hand.
17
To access the scan area, you need to
open the scanner lid. Push the touch
screen so it twists backwards on its arm
until it rests in its "service" position.
14
Pull the touch-screen back towards you
until you hear the click that indicates it
is locked in its upright "ready" position.
18
There are 2 lid release buttons at the
back of the scanner. Simultaneously
press the buttons inwards with your
fingers until you feel them unlock.
15
Attach the stylus to the touch-screen.
19
Retain pressure on the lid release buttons
and your grip on the lid edge, and pull
the lid backwards towards your body.
Open the scanner lid all the way back.
16
Cleaning the scan area...
You are now required to clean the scan
area - glass plate. To do so you will
need clean lint free cloths and a mild,
streak-free glass cleaner. These are not
provided with the scanner.
Caution: do not use abrasives, acetone,
benzene, or fluids that contain these
chemicals. Do not spray liquids directly
onto the scanner glass plate or anywhere
else in the scanner.
20
Apply a mild, streak-free glass cleaner to
a lint-free cloth, such as the one supplied
with your scanner, and gently clean the
glass surface. The surface must be very
clean; any dirt will appear on a print.
Surface must be very
clean; any dirt will ap-
pear on a print!