HP Designjet T1120 SD-MFP Anleitung Seite 10

45
Select the language for the software
interface.
49
Define one or more initial destinations
for scanned files (accessible folders on
the network): Press the Add button to
define a destination. Enter a label, the
full network path to the folder and login
information. Check 'Remember' if the
password should be stored after power
down.
46
Accept the licence agreement.
50
Press the Test Connection button to
verify your entries. Press OK when done.
Repeat the steps 49 and 50 if you want
to enter additional destinations.
NOTE: If you will only scan to USB,
press the cancel button to skip this step.
You can create additional destinations
later on.
47
Set your local date and time. The time
zone for your area and daylight period
is set in relation to GMT.
51
Your system now has all the information
it needs and will start up in the Copy
screen.
48
Enter your network settings to join your
system with your local network. Select
the DHCP option for automatic setup
(on DHCP server networks) or enter the
correct IP data manually.
52 For any further information on how to use
your scanner, see the online help
available from your touch screen.