Quick Start; Setting The Time And Day - Carrier Comfort-Serie Bedienungsanleitung

Introduction
Carrier's NUI series programmable user interface is a unit /
wall--mounted, low voltage, user interface which maintains
room temperature and domestic hot water temperature by
controlling the operation of a heating / cooling system. A
variety of features are provided including separate heating
Note: the NUI will mount the front cover (lid) only in case of wall installation.
Ignore references to lid in case of unit installation.

Quick Start

Setting the time and day

You must set the time and day before you can use any of the
NUI's programming features.
1. Open the lid
2. Press D/H/M SET CLOCK (
3. Press the up or down button, to change the hour.
Stop on the correct hour.
4. Press the D/H/M SET CLOCK (
again and the minutes will flash on the display.
5. Press the up or down button to change the minutes.
Stop on the correct number.
6. Press the D/H/M SET CLOCK (
again and day will flash on the display.
7. Press the up or down button to change the day.
Stop on the correct number.
8. Press OK button or close the lid.
) button.
) symbol button
) symbol button
and cooling set-points, 2 zone management, domestic hot
water management, keypad lockout, backlighting, and
scheduling for all week days with 2 or 4 or 6 periods.
This manual covers usage, configuration and installation
of NUI.
5