Advanced Programming Options; Changing The Temperature; Advanced Programming Display Codes - Carrier Comfort-Serie Bedienungsanleitung

Advanced Programming Options

Changing / holding the temperature
You can temporary change temperature settings in one
zone (using the NUI placed in that zone).
1. Open the lid.
2. Press the zone button (
3. Press up or down buttons on the right side until you
reach the desired temperature setting. This creates a
"temporary hold" until the next pre-set time period.
You will see schedule active icon
( ) flashing on the display.
4. To maintain that temperature setting so it doesn't
change during the next pre-set time period, press
hold ( ) symbol button on the left side. The
temperature will stay at the setting you selected until
you release the hold. The schedule active icon (
will disappear.
5. To return the temperature to the pre-set level for that
time period, press hold (
the hold and the temperature will return to its
programmed level. The schedule active icon (
appear.
6. Close the lid.

Advanced programming display codes

You can customize several system parameters.
Refer to the main unit documentation for the complete list
and description of paramenters.
Changing user settings
Now you can change the settings of different features with
the NUI. Here is how you can program you thermostat
settings.
1. Open the lid.
2. Press home ( ) and away (
hold for 3 seconds. You will see parameter number "1"
is flashing in the time display area.
3. Press mode (M) button, you will see parameter value
will be flashing in the temperature display area of the
display.
4. Press up or down buttons to change the settings to
)to select zone 0.
)
) symbol. This releases
) will
) buttons and
11