Werbung
Verfügbare Sprachen
Verfügbare Sprachen
L
Antenna sockets
Please use only satellite TV sockets without DC transmission (for example, Hama # 43983).
We also recommend using DC isolation elements (DC blocker).
Use the type of socket that provides adequate signal for each receiver.
Ensure suitable connection attenuation.
Cable structure
The "Hama single cable system" can be used with every cable structure.
No star distribution is required.
Receiver / Set Top Box
Since the "Hama single cable system" does not operate with frequency translation, every
digital satellite receiver can be used. The available programs are found in the normal seek
function. The "Hama single cable system" allows the reception of e.g., available German
digital radio and TV programs in MPEG2 format from ASTRA.
3. Installation
Antenna
Align the satellite antenna approximately 80cm in diameter (central Europe) to the
ASTRA orbital position at 19.2° east.
Use a measuring device (e.g. sat finder) or the level measurement in the satellite receiver.
Ensure that no objects – also no trees or bushes – are between the antenna and the satellite.
LNB
You can operate the Hama single cable system with a twin, quad or a quad-switch LNB.
Only use both V high and H high 10.6 GHz (oscillator) outputs when using a quad LNB.
Connect a 75Ω termination resistor to the unused outputs.
Werbung
