Werbung
Verfügbare Sprachen
Verfügbare Sprachen
• Figure 24 illustrates all the possible ways to adjust
the two support systems by slackening the knobs
(P).
• Once all the various components which make up
the support system have been satisfactorily
adjusted, make sure all the corresponding knobs
(P) are securely tightened.
AvtÃ!#Ã
!&Ã
HPWDIBÃUC@ÃXPSF7@I8CÃ
It is possible to move the workbench even in an
assembled configuration, as illustrated in figure 25, by
simply removing the tool support system without the
need to detach the tool from the latter, see figure 27.
AvtÃ!$Ã
Before transporting the bench it is necessary to carry
out the following operations:
• close and lower the work-piece support devices,
blocking them securely in place by tightening the
relative knobs (P);
• completely close and fold the telescopic support
feet. Make sure that when they are positioned in
their relative seats inside the structure that the
locking devices click into place;
• gather up and coil the power cable, as illustrated in
figure 25;
• the multifunction bench can now be carried using
the integrated handle.
AvtÃ!%Ã
Ã
AvtÃ!&Ã
Ã
Ã
Ã
Ã
Ã
Ã
Ã
Ã
Ã
Ã
Ã
Ã
17
Werbung
