Installing And Replacing Batteries - Oregon Scientific EB833 Bedienungsanleitung

Ž
[BARO] Barometer Button
- Alternates between Barometric displays
TIME Button
√
- Alternates between Time displays

[+ -] Button
- Changes the value of a setting
- Clears memories
- Activates / deactivates alarm
- Selects units of measure
- Switches from fast to slow sampling rate
≈ Battery Compartment
- Houses 2 (two) CR-2032 batteries
- RESET Button
∆ Sensor Vents
- Openings for atmospheric sensitive sensors
≥ Neck Cord
- Facilitates carrying around the neck or attached to
a rucksack or belt
”
Hand Grips
- Rubberized grips that prevent the unit from being
accidentally dropped
•
Wall-Mount Bracket
- to mount unit to wall or vertical surfice
INSTALLING AND REPLACING OF
BATTERY
The EB833 operates with 2 (two) CR-2032 Lithium
batteries that are included with all new units. During
initial packaging, the batteries were insulated with a red
tape so as to maximize the shelf life of the product.
Before use, remove the insulation tape by gently pulling.
Upon removal, the display will show a full-segment
display for 3 seconds; it will then enter the Normal
Altitude Display.
FULL SEGMENT DISPLAY
3