Maintenance; Specifications - Oregon Scientific EB833 Bedienungsanleitung

MAINTENANCE

When handled properly, this unit is engineered to
give you years of satisfactory service. Here are a few
product care instructions:
1. Do not immerse the unit in water. If the unit comes in
contact with water, dry it immediately with a soft lint-
free cloth.
2. Do not clean the unit with abrasive or corrosive
materials. Abrasive cleaning agents may scratch the
plastic parts and corrode the electronic circuit.
3. Do not subject the unit to excessive: force, shock,
dust, temperature, or humidity. Such treatment may
result in malfunction, a shorter electronic life span,
damaged batteries, or distorted parts.
4. Do not tamper with the unit's internal components.
Doing so will terminate the unit's warranty and may
cause damage. The unit contains no user-serviceable
parts.
5. Only use new batteries as specified in this instruction
manual. Do not mix new and old batteries as the old
batteries may leak.

SPECIFICATIONS

Operating Temperature
Range
Altimeter Functions
Range
Resolution
Sampling rate
Range
Units of measure
Barometer Functions
Range
hPa
Resolution
Sampling rate
Units of measure
Thermometer Functions
Range
15
-10°C to 60°C
(-14°F to 140°F)
-500 m to +7000 m
1 m / 1 ft
2 sec (normal mode)15min
(sleep mode: same level for
more than 15 min.)
60,957 m / 199,999 ft
m or ft
400 mb/hPa to 1070 mb/
1mb/hPa (0.03inHg)
15 minutes
mb/hpa or inHg
-40°C to 70°C
(-40°F to 158°F)