Herunterladen Inhalt Inhalt Diese Seite drucken

Blaupunkt SMART CHARGER 170 Bedienungsanleitung Seite 9

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

WARNING
Never use the charger for non-rechargeable lead acid batteries or alkaline
batteries.
Only use the charger for 6V and 12V lead acid batteries. Do not attempt to charge frozen
batteries.
During charging, ensure there is sufficient ventilation available.
DANGER OF ELECTRIC SHOCK! Do not operate the appliance if the cables, the mains
cable or mains plug are damaged. A damaged mains cable indicates a life-threatening
danger due to electric shock.
Before connecting to the power, ensure that the power connection is earthed, is
230V~50Hz, and is 16A fused and equipped with an RCCB (Residual Current Circuit
Breaker) switch in accordance with the current regulations.
Disconnect the charger from the grid, before you make or break connections to the
battery.
First, connect the clamp that is not connected to the bodywork. Then connect the other
clamp to the bodywork, away from battery and fuel pipe. Only after this, connect the
charger to the grid.
After charging, disconnect the charger from the grid. Only after this remove the clamp
from the bodywork. Following this, remove the clamp from the battery.
DANGER OF EXPLOSION AND FIRE HAZARD! Protect yourself from a highly explosive
hydrogen-oxygen reaction.
Ensure that during charge and maintenance charge procedures, there are no naked lights
(flames, cinders or sparks).
Ensure that the positive cable does not come into contact with fuel lines (e.g. petrol pipe).
Ensure that there is no possibility of ignition of explosive or flammable substances (e.g.
petrol or solvents), while using the charger.
DANGER OF CHEMICAL BURNS! Wear protective glasses! Wear protective gloves. If eyes
or skin has come into contact with battery acid, rinse the affected body region off with a
large amount of clean water and consult a doctor straight away.
Avoid causing a short circuit when connecting the charger to the battery. Connect the
negative pole connector cable only to the negative (-) pole battery or to the body work.
Connect the positive pole connector cable only to the positive (+) pole of the battery.
Do not place the charger close to fire, heat or to places with long-term exposure to
temperatures over 50°C.
Ensure that no fuel lines, electric cables, hydraulic or coolant pipes are damaged when
connecting the charger.
Do not cover the charger with any objects. Protect the electrical contact surfaces of the
battery from short circuiting.
Competence Center Car Multimedia
Evo-Sales GmbH
Robert-Henseling-Straße 11
31789 Hameln/Deutschland
www.blaupunkt.com
After the manual, if any change, we will not notice!
7

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis