Maintenance And Care; Safety Instructions - Blaupunkt SMART CHARGER 170 Bedienungsanleitung

Program 2
For charging 12V batteries with a capacity of less than 14Ah.
Press the Mode selection button 10 , to select program 2. The symbol
on the LCD. During charging, the charge display 7 flashes and shows the progress of the
charge procedure (1 ~ 4 bars). When the battery is fully charged, the condition bar display
8 shows 4 bars. When the flashing stops, the appliance will automatically switch to
maintenance charge mode.
Program 3
For charging 12V batteries with a capacity of between 14Ah ~ 120Ah.
Press the Mode selection button 10 , to select program 3. The symbol
on the LCD. During charging, the charge display 7 flashes and shows the progress of the
charge procedure (1 ~ 4 bars). When the battery is fully charged, the condition bar display
8 shows 4 bars. When the flashing stops, the appliance will automatically switch to
maintenance charge mode.
Program 4 : 12V (14.7V/3.8A)
For charging 12V AGM Series batteries with a capacity of between 14Ah ~ 120Ah or under
cold conditions.
Press the Mode selection button 10 , to select program 4. The symbol
on the LCD. During charging, the charge display 7 flashes and shows the progress of the
charge procedure (1 ~ 4 bars). When the battery is fully charged, the condition bar display
8 shows 4 bars. When the flashing stops, the appliance will automatically switch to
maintenance charge mode.
Maintenance charge mode
Depending on the voltage drop of the battery, caused by continuous current drain from
attached accessories or natural self-discharge, the charger will react accordingly to
maintain the battery condition. The battery can remain connected to the charger for
longer periods of time if it is disconnected from the vehicle.
Appliance protection function
The charger will switch off if an abnormal situation occurs, such as short circuit, critical
voltage drop during charging, broken circuit or reversed connection is detected.
Should the appliance become too hot during charging, the output current is automatically
reduced. This protects the appliance from damage.

MAINTENANCE AND CARE

Before you carry out any work with the battery charger always pull the mains
WARNING
plug out of the mains socket.
The appliance is maintenance-free. Ensure that all of the battery charger components are
in place and in good working condition. Do not under any circumstances use solvents or
other aggressive cleaning agents. Clean the plastic surfaces of the device with a clean dry
cloth. No internal servicing required, as there are no user-serviceable parts.
Store the battery charger the upright position in a cool, dry place. Failure to do so could
result in personal injury or property damage.

SAFETY INSTRUCTIONS

Children or persons who lack the knowledge or experience to use this type of device
should not attempt to use it without supervision or instruction by a qualified person
responsible for their safety. This appliance is not a toy.
6
: 12V (14.4V/0.8A)
: 12V (14.4V/3.8A)
is displayed
is displayed
is displayed