Blaupunkt SMART CHARGER 170 Bedienungsanleitung Seite 4

Before using the product, please read this manual carefully. The manual is to guide your
usage of this product specially.
INTRODUCTION
We congratulate your choice of a high quality product. The instruction manual for this
product contains important information concerning safety, use and disposal. Before using
the product, please familiarize yourself with all of the safety information and instructions
for use. Only use the unit as described and for the specified applications. If you pass the
product on to anyone else, please ensure that the instruction manual is included.
Intended use
This model is a multistep battery charger (may be referred to as appliance) for charging
and charge retention of 6V or 12V rechargeable lead acid batteries of the following types:
Flooded Cell, Ca/Ca, VRLA, MF AGM or GEL with electrolyte solution.
This charger is not suitable for Lithium batteries!
The manufacturer is not liable for damage caused by improper use. The device is not
intended for commercial use and to be used indoors only.
Parts included
1 Charger; 2 types of detachable terminal lead sets [Clamp & Cigarette Lighter Plug]; 1
Instruction Booklet.
Parts description
Refer to Figure A:
1 12V 0.8A - (Program 2)
3 12V 3.8A - (Program 4)
5 LED reverse connection
7 Charge display
9 Voltage display
11 Charger
13 Input cable lead
15 "-" pole clamp (black)
17 Output cable lead
Technical Data
Input voltage:
Rated voltage outgoing: 6V/12V
Ambient temperature:
Protection class:
Charging battery types: 6V lead acid battery1.2Ah-14Ah
2
2 12V 3.8A - (Program 3)
4 6V 0.8A - (Program 1)
6 LED stand-by
8 Condition Bar display
10 Program selection button (MODE)
12 Fastening eyelets
14 "+" pole clamp (red)
16 Cigarette lighter plug set
18 SAE socket
220-240V~50/60Hz
0°C to 40°C
II/
12V Lead acid battery1.2Ah-120Ah
Rated power:
Rated output current:
Housing protection type: IP 65
60W
0.8A/3.8A