Safety Instructions - Salewa Duro 2.0 Anleitung

EN
8
GENERAL
Please read this information carefully before using the product and observe the instructions contained here-
in. Failure to adhere to the following instructions can adversely affect the level of protection provided by
this helmet�
The product is a mountaineering helmet, primarily designed for impact protection against rock fall
and offering protection to climbers during a fall. It is essential that you familiarise yourself with this
product before using it for the first time.
Please note the following information:
Mountaineering and climbing are dangerous sports that can involve unforeseeable risks� You are
responsible for any activities that you undertake and any decisions that you make. Please find out
about the risks involved in these type of sports prior to practising them� SALEWA recommends full
training by appropriate personnel (e�g� mountain guides, climbing trainers) before undertaking any
mountaineering or climbing activities� In addition, anyone practising these sports is fully responsible
for finding out about the proper course of action and techniques required for the safe performance
of any rescue operations� The manufacturer is not held liable in any form for the consequences of
abuse or incorrect use of equipment. Please also take note of the certification details relevant to any
other protective equipment components used�

SAFETY INSTRUCTIONS

Always check the condition of your helmet first before using it. Check all straps, attachment parts and
make sure that the adjustment elements on the headband function properly� Make sure that the helmet
shape is not deformed and that it does not have any other visible damage� WARNING: Please note that
your helmet has been designed to absorb the maximum amount of force during impact. This is effected
by the helmet deforming, which can cause it to incur damage or be rendered unfit for use. However,
this is not always visible to the naked eye� For this reason, the helmet must be replaced immediately
following any significant impact in cases such as a climber fall or as a result of rock or ice fall, even if
the damage is not visible�
Extreme temperatures (below -20°C/-4°F and above +35°C/95°F), paint, solvents, adhesives/glues or
stickers can all alter the physical characteristics of the helmet, and therefore may only be used with
instructions or permission provided by the manufacturer�
Paint, solvents, adhesives/glues or stickers can all alter the physical characteristics of the helmet, and
therefore may only be used with instructions or permission provided by the manufacturer�
If you are in any doubt whatsoever regarding the condition of your helmet, please contact your SALEWA
specialist dealer�
HELMET SETTINGS
Warning: A helmet can only provide optimum protection if it is properly and correctly fitted to match
your individual head size and shape� If this is not the case, DO NOT USE THE HELMET� Swap it for
another size or another model. A helmet that does not properly fit your head, or which is too loose,
will significantly impair the helmet's protective capability.
Illustration 1 - Adjusting helmet fit to your head size:
First, expand the headband to its maximum dimensions via the adjustment wheel (turn anti-clock-
wise) and put the helmet on� Then turn the wheel clockwise until the headband sits snug to your
head. To get the perfect fit, you can slide the headband vertically up or down at the back.
The Piuma 2�0 has a magnetic buckle on its chin strap which is easily adjustable with one hand� You
should practice opening and closing this buckle before using it�
Illustration 5A - Plug buckle:
To close: Push both buckle ends one into another so that they slot together� The plug buckle closes
with a loud click� To open: Press the buckle laterally�
Illustration 5B - Magnetic buckle:
To close: Bring both buckle ends together so that they slot into one another� The magnetic buckle
closes with a loud click� The Salewa logo should be on the outside�
To open: Slide both buckle ends away from one another sideways�