Description For Display; Motor - NSK Multi Pad Bedienungsanleitung

DESCRIPTION FOR DISPLAY

5
5–1 MOTOR
While the display shows the Fig. 1, you can control a motor by pressing the foot control pedal.
Rotation display (Fig. 1–
When the motor is stopping, the display shows the Maximum Rotation Speed. When the Motor is rotating,
the display shows the actual rotation speed. When the Motor stops, the display shows "0" on the display then
turn to the Maximum Rotation Speed originally selected.
Rotation Speed display (Fig. 1–
SET VALUE display (Fig. 1–
The pre–programmed Maximum Rotation Speed is indicated on the display.
NOTICE icon will go off while the Motor is rotating. When increasing or reducing the Maximum
Rotation Speed while the motor is rotating,
Program Number display (Fig. 1–
The Program Number you selected will be displayed.
For detailed Program setting, refer to "7. USEFUL FUNCTIONS".
Gear ratio display (Fig. 1–
The preset Gear ratio is displayed. A total of 10 different Gear ratios can be selected. 8 Gear ratios
are default and cannot be changed. 2 Gear ratios are for customized setting by users.
For detailed Gear ratio setting, refer to "6. SETTINGS".
Fig.1 Normal display when using micromotor
)
)
The display shows Rotation Speed you selected. While the Motor is rotating, the actual
rotation speed will be shown on the display.
)
)
)
icon appears for 1 second.
7