CO/Tech TBK060 series Original Bedienungsanleitung Seite 6

Selecting an operation mode NORMAL, ECONOMY or AF
• Press [ SET ] twice to select the economy mode. The ECONOMY indicator light will
start to flash. Press and hold in [ SET ] to confirm selection of the ECONOMY mode.
The ECONOMY indicator light will now shine steadily to indicate that the radiator is in
economy mode. The set temperature will be controlled by the thermostat.
• Press [ SET ] once to select the NORMAL mode. The NORMAL indicator light
will start to flash. Press and hold in [ SET ] to confirm the mode selection.
The NORMAL indicator light will now shine steadily to indicate that the radiator is in
normal mode.
• Press [ SET ] four times to select the anti-frost mode. "AF" will appear on the display.
Press and hold in [ SET ] to confirm the mode selection. In this mode the radiator will
maintain a temperature of 5–7 ºC by periodically switching on and off.
Setting the heating power mode: low, medium or high
To set the mode, press [ SET ] three times. Use [  DOWN ] and [  UP ] to adjust.
"LO" is displayed when the lowest power mode is selected. "P2" when the medium
power mode is selected and "HI" when high power is selected.
Setting the timer to switch off
1. Whilst the radiator is in operation, press [ SET ] five times. "TIMER" flashes on
the control panel and the display will show either "0" or the previously set value.
2. Press [  DOWN ] or [  UP ] to set the time after which the radiator should switch
off. The display will show the countdown of the time remaining before the radiator
switches off.
3. The set time is saved and the radiator automatically resumes temperature display
mode. The TIMER indicator light on the control panel will come on.
4. When the set time has elapsed, the radiator will switch off. The only light on
the control panel will be the "POWER" indicator light.
5. Switching the radiator off or setting the timer to 0 will deactivate the timer and
the indicator light will go off.
Setting the timer to switch on
1. Whilst the radiator is switched off and only the POWER indicator light is on,
simultaneously press [ SET ] and [  UP ]. The TIMER indicator light on the control
panel will flash and "0.0" will appear on the display.
2. Press [  DOWN ] or [  UP ] to set the time after which the radiator should
switch on. The display will show the countdown of the time remaining before
the radiator switches on.
3. The set time value will be saved. The set time will appear on the display and
the "TIMER" indicator light on the control panel will come on.
4. When the set time has elapsed and the radiator comes on, it will heat the room to
the set temperature.
5. Switching the radiator off or setting the timer to 0 will deactivate the timer and
the indicator light will go off. This applies even if the wall socket is switched off,
the radiator is unplugged or if there is a power cut.
6