CO/Tech TBK060 series Original Bedienungsanleitung Seite 5

Assembly
Securely attach both feet to the bottom of
the radiator using the supplied sheet metal
screws. The radiator must not be used if
the feet are damaged or missing.
Operating instructions
The temperature can be set in the range of 5–30 ºC. The default factory setting for
NORMAL is 24 ºC and for ECONOMY, 17 ºC.
1. Find an appropriate location for the radiator and follow the safety instructions
listed above.
2. Plug the mains lead into a wall socket.
3. Press [ POWER ].
Setting the temperature
NOTE: It is possible to programme 2 different preset temperatures into the radiator in
order to be able to switch quickly between desired temperatures. For example, one
temperature can be saved in NORMAL mode, and a lower temperature can be saved
in ECONOMY mode for when a cooler room is preferred.
Programming the NORMAL mode temperature
1. To change the temperature, press [ SET ]. The NORMAL indicator light on
the control panel will flash. The current normal mode temperature will flash on
the display.
2. Press [  DOWN ] or [  UP ] to set the desired temperature.
Programming the ECONOMY mode temperature
1. To change the temperature of the economy mode, press [ SET ] twice.
The ECONOMY indicator light on the control panel will flash and the current
temperature setting will flash on the display.
2. Press [  DOWN ] or [  UP ] to set the desired temperature.
3. When the temperature setting has been changed it will be shown on the display
and saved in the memory.
NOTE: In order to activate the ECONOMY mode during programming, press and hold
in [ SET ].
5