Preparing The Coffee - Simpla Lavazza A MODO MIO Bedienungsanleitung

EN
COFFEE SUPPLY PROCEDURE
Make sure the coffee supply button is ON with steady light and the
capsule loading lever is at rest position.
If the coffee supply button is pressed during the heating cycle then,
the machine will give three sounds and will supply no coffee.
Put only compatible capsules in the capsule compartment.
Single-dose capsules are preset for supplying only one coffee/
product. DO NOT reuse capsules after their first use. Fitting 2 or
several capsules simultaneously will cause machine malfunc-
tioning.
To have your coffee at the ideal temperature, warm-up the cup
with hot water. Position the cup under the spout without fitting
the capsule. Pull the loading lever to stop limit and then press the
coffee supply button to pour hot water enough for warming up
the cup.
Place the mug/small cup under the dispensing
1
spout

PREPARING THE COFFEE

Lift the capsule compartment lid, insert a capsule and then re-
2
close it.
Pull the loading lever forwards until it stops.
3
Press the coffee supply button and wait until obtaining the desired
4
amount in the cup. Press the button again to stop supply.
Do not move the lever to the off position while coffee is brewed.
Bring the lever back to rest position to eject the spent capsule to
5
the used capsule drawer.
The machine is ready for a new supply.
The cup grill can rotate up to 180° to allow the use of mugs, small
cups and containers of various sizes.