Clear Button; Bag; Errors - Kaleas LDM 500-60 Bedienungsanleitung

1x
short
1x
short
Optional:
1x
>2 s
 The representation of a stored value corresponds to its origin. In the
case of functions and calculations, the corresponding units of
measurement and individual values are also displayed, e.g., in the
case of a surface area, these are two length values and one surface
area value.

Clear button

1x
short
multiple
times

Bag

Use the included belt bag to protect the Distance Meter when not
in use.

Errors

A faulty measurement or result is indicated by the display "InFo
nnn" [3, 4] and a long signal tone. Possible causes may be:
InFo Cause
204 Data overflow
205 Measurement outside
the range
34
Invoking the desired memory address
 Display [11] 1...20
 Display [4]
The measured value is available for use in all
functions.
 Display [10]
The value from the display [4] is saved to the buffer
and memory address 1.
The last operation is reset, for example an erro-
neous single value during the execution of a
measuring function.
The contents of the display are cleared in the
following order: [4] – [3] – [2].
Indicates active memory address
Apply value from memory address n
Remedy
Repeat the work steps.
Adhere to the permissible measure-
ment range of the Distance Meter.
LDM 500-60 ENGLISH
n
© KALEAS GmbH & Co. KG