Before Using The Distance Meter; Intended Use; Concept Design Of The Ldm 500 - Kaleas LDM 500-60 Bedienungsanleitung

Cleaning
Customer service and support
Warranty
Disposal
General safety instructions
Workplace safety
Electrical safety
Device-specific safety instructions
Laser-specific handling rules
Using and handling batteries
Product contents
Specifications

Before using the Distance Meter

!
Read the operating instructions thoroughly.
!
Note the safety instructions.
!
Do not use the meter if you have not completely understood the
instructions or safety information.
 Failure to follow the safety warnings and instructions for use can
result in electrical shock, fire or serious injury.

Intended use

The Kaleas LDM 500-60 is a measuring device for non-contact
measurement of distances, surface areas and volumes; the distance
from the measuring site cannot exceed 60 m. The measurement us-
es laser technology. The Distance Meter is battery-operated.

Concept design of the LDM 500-60

The LDM 500-60 is used to quickly measure distances on buildings
and objects. The reflection of an emitted laser beam [B] is received
by a measuring probe [A], and its interference is evaluated. State-
of-the-art technology allows very precise measurement even at
larger distances.
Surface areas and volumes are extremely easy to calculate from sev-
eral readings and are automatically determined. Readings can also
be added (plus) or subtracted (minus).
24
LDM 500-60 ENGLISH
© KALEAS GmbH & Co. KG
35
36
36
36
37
37
37
38
38
39
40
40