Herunterladen Inhalt Inhalt Diese Seite drucken

Hints On Disposal; Declaration Of Conformity - Klarstein 10029071 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Boiling
1. To put the kettle on a smooth plane.
2. To put the kettle on the power base plate, plug the power cord into the socket and then push downwards the
switch below the handle to turn on the indicator and start heating.
3. The kettle body shall not be separated from the base plate when the power is on for boiling.
4. The switch has automatic power-off to turn off the indicator after the water is boiled.
5. It is required to lift the product from the power base plate before pouring hot water.
6. If re-boiling is required, the kettle switch can be turned on after waiting for one minute. Forced pressing on
the switch may cause damage to kettle working principle.
7. Please put idle kettle on the power base plate. The product will not restart unless it is turned on again.
Cleaning and Maintenance
• The kettle can be cleaned only when the power is cut off.
• Do not immerse the kettle base into water.
• 1. Mineral sediments in the kettle shall be removed periodically to extend service life. To do so it is required
to mix vinegar and water by 1:2 and pour the mixture into the kettle, and then turn on the power to enable
kettle working and wait for auto power-off. It is required to keep the mixture in the kettle for 24 hours, pour
it out and then fill fresh water to a certain position before kettle working. It is required to clean inside surface
of the kettle with fresh water after pouring out the water mixed with scale and vinegar.
• If the electric kettle failure during operation, separate the kettle from the heating base plate, pour out the
water and then cool the kettle to room temperature before fault detention or cleaning.
According to the European waste regulation 2002/96/EC this symbol on the product
or on its packaging indicates that this product may not be treated as household waste.
Instead it should be taken to the appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of this product. For more de-
tailed information about recycling of this product, please contact your local council or your
household waste disposal service.
Producer: Chal-Tec GmbH, Wallstraße 16, 10179 Berlin, Germany.
This product is conform to the following European Directives:
2004/108/EC (EMC)
2011/65/EU (RoHS)
2006/95/EC (LVD)
5

Hints on Disposal

Declaration of Conformity

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis