Warranty - Stuart SI500 Bedienungsanweisung

heat to the set temperature. The actual
temperature inside the unit will be displayed on
the screen. The minimum set temperature is
ambient +5ºC and the maximum, 60ºC.
5.4 uSb connectivity
Your incubator has capability to connect to a PC
via USB for long term tracking of the incubator
temperature, whilst left overnight for instance.
Remove the waterproof cap from the USB port
on the incubator and connect the included cable.
Connect the other end of the cable to a free USB
port on your PC. The latest version of our PC
software is available for download from www.
bibby-scientific.com. Once downloaded, select
run the program and follow the on screen
commands.
6. maintenance, servicing
and repair
warning: Ensure the unit is disconnected
from the mains electricity supply by
removing the mains power lead before
attempting maintenance or servicing.
This equipment does not require routine
servicing. The only maintenance required is to
clean internal and external surfaces with a damp
cloth and mild detergent. Spillages or splashes
should be cleaned up straightaway after isolating
the unit from the mains electricity supply. Allow
the unit to dry completely before operating
again.
6.1 repairs and support
Any repairs or replacement of parts MUST be
undertaken by suitably qualified personnel.
only spare parts supplied or specified by
Stuart or its agent should be used. Fitting of
non-approved parts may affect the
performance of the safety features designed
into the instrument.
For a comprehensive list of parts required by
service engineers conducting internal repairs,
or to receive a service manual, please contact
4
the Service Department at;
service@bibby-scientific.com
Tel: +44 (0)1785 810475
Fax: +44 (0)1785 810471
Quote both the model and serial number.
For any other technical enquiries, please contact
the Technical Support Department at:
stuarthelp@bibby-scientific.com
Tel: +44 (0)1785 810433.
7. accessories
code Description
SI500/1 Tube holder 64 x 1.5ml tubes
SI500/2 Tube holder 25 x 15ml tubes
SI500/3 Tube holder 12 x 50ml tubes
SI500/4 Tube holder 16 x 30ml universal
container
RSSL1 Spare securing bar for SI500
SI600/1 Spare securing bar for SI600

8. warranty

Stuart warrants this instrument to be free from
defects in material and workmanship, when used
under normal laboratory conditions, for a period
of three (3) years. In the event of a justified
claim, Stuart will replace any defective
component or replace the unit free of charge.
This warranty does NOT apply if damage is
caused by fire, accident, misuse, neglect,
incorrect adjustment or repair, damage caused
by installation, adaptation, modification, fitting
of non-approved parts or repair by unauthorised
personnel.
Bibby Scientific Ltd.
Beacon Road,
Stone,
Staffordshire
ST15 0SA
United Kingdom
Tel: +44 (0)1785 812121
Fax: +44 (0)1785 813748
E-mail: equipment@bibby-scientific.com
www.stuart-equipment.com