Cycler Operation; Start Screen = 'Run; Running Stored Programs ('Run') - Peqlab peqSTAR series Kurzanleitung

Short Manual peqSTAR thermal cyclers
5

CYCLER OPERATION

The operation of the thermal cycler can be run by the internal touch screen, either using the touch sensitive surface
of the display or by using a mouse connected to a free USB port.
If the user has to enter numbers or text the corresponding field has to be touched on the touch screen or clicked
with the mouse. An appropriate keyboard will appear on the screen according to the expected entry.
5.1

Start screen = 'Run'

The last ran PCR program is displayed in the 'Run' dialogue and can directly be restarted with the button 'Start
PCR'.
Note: At peqSTAR 2X double block thermal cyclers the desired block can be chosen in the dialogues 'L' (left) and
'R' (right). For peqSTAR 96X, 384X and InSitu systems this option is not available.
5.2

Running stored programs ('Run'):

1. Open the selection dialogue in the 'Run' dialogue with the button
2. Select the desired program in the selection dialogue and load to the 'Run' dialogue with the button
'Open'.
3. The loaded program is started by using the
PEQLAB_v1212E
button.
4
.