Quick Start - Ecler EVO5 Kurzanleitung

4. QUICK START

Congratulations, you have bought an original ECLER professional DJ mixer!
The EVO5 is an unique digital mixer with A/D and D/A converters at 24 bit/96KHz, internal
Firewire soundcard with 12 input channels and 12 output channels, a powerful,
completely programmable effects module, MIDI control with 69 controllers, 64 individual
parameter patterns and a full colour monitor from which you will be able to edit all of the
mixer's controls.
We suggest you to read the user manual before starting to use your EVO5. You will find
the guide on the included CD-ROM. If you prefer to read the manual later, you will find the
necessary information to easily set up and experiment with your EVO5 in this quick guide.
You can also visit our web site "http://www.eclerdjdivision.com", where you will find
additional information.
For the following procedure you will need a CD player and headphones. If you also wish
to experiment with the MIDI controller and the internal soundcard you will also need a
computer with firewire connection.
1. Set the controllers to their initial position.
Set the rotary controllers GAIN, HI, MID and LOW from channel 1 (5, 6, 7, 9) to the
central snap-in position. Put the channel fader (15) down and move the A/OFF/B switch
(14) to position A (this channel is now assigned to the crossfaders' A side).
2. Connect the headphones.
Connect your headphones to one of the outputs on the mixer's front panel (23). Set the
MONITOR LEVEL (22) to minimum and move the MONITOR SELECT control (21) to the
PFL position.
3. Connect a CD player.
Connect a CD player to LINE input on channel 1 (43), insert a CD and play the CD.
4. Connect the mixer's power cable.
Connect the power cable to power source input (55) on the mixer's back side and turn the
mixer on by pressing the MAINS INPUT switch (53).
6