Chauvet Hurricane 1800 Flex Schnellreferenzanleitung Seite 4

Hurricane™ 1800 FLEX QRG
AC Power
Resetting the
Breaker
This product has a fixed voltage power supply and it can work with an input
voltage of either 120 V, 60 Hz or 230 V, 50 Hz, depending on the specific model.
The Hurricane™ 1800 FLEX is equipped with a resettable circuit breaker.
Follow the instructions below to reset.
Disconnect the product from power before resetting the breaker.
1. Disconnect the product from power.
2. Allow unit to cool for 15 minutes.
Note: The breaker will not reset until it has been allowed to cool.
3. After 15 minutes, reset the breaker by pressing the breaker button until it
latches in the operation position.
4. Reconnect power.
If the breaker does not reset (i.e., the breaker button will not remain
latched), contact CHAUVET® for troubleshooting.
4
EN