Intercom Mode; Navigation System Mode; Reset (Restoring The Factory Settings) - Louis Probiker KX4 Z-Link Bedienungsanleitung

Extended functions
The music continues playing automatically once your conversation has ended.

8.2. Intercom mode

You will have no problem receiving a phone call whilst you are in intercom mode.
1. Receiving a phone call in intercom mode
A sound signal will alert you to an incoming phone call. Press and release the
phone button to end the intercom function. Press and release the phone button
again and you will receive the phone call immediately.

8.3. Navigation system mode

1. Receiving a phone call
You can receive phone calls if you have a mobile phone with a compatible naviga-
tion system, by pressing the phone button on the Z-Link operating unit or following
the instructions on the navigation system display. Please refer to the information
on operating the navigation system in the respective operating instructions.
Safety instruction:
For safety reasons we recommend you use the display on the navigation
system to operate your mobile phone if possible.
2. Receiving an intercom call
You will receive a sound signal for an incoming intercom call. Press and release
the phone button to receive the call.
Note:
With navigation systems which support an MP3 player function, you may find
you have to start the music manually when you have finished talking (the
music will not continue playing automatically in all devices).
36

9. Reset (restoring the factory settings)

Make sure the Z-Link is switched off. Then press all three buttons
("phone", "+" and "-") at once for approx. five seconds until the blue & red LEDs
light up. The device has now been reset.
Note:
Resetting the device deletes the entire memory and all the connections.
You will have to pair devices with one another once again if you wish to restore
any previous connections.
Reset
37